Motorcycle Parts and Accessories
For Japanese Brand
Bikes
- Accessory Items
- Apparel for Bikers
- Body Parts
- Brake Parts
- Controls
- Chassis
- Liquids
- Drive Parts
- Electrical
- Exhaust Parts
- Fuel System Parts
- Gaskets and Seals
- Motor Parts
- Shop Tools
- Windshields
- Gift Shop
- Ebay Store
- Tools and Tips
- SPECIAL AREAS
- Chopper Stuff
- Sport Bike Stuff
- Cruiser Stuff
- Deals
This is page three for a specialty area that focuses on accessories and items for custom chopper and bobber Japanese motorcycles. Most items can be also found in our main catalog. Click one of the links below to get started.
Chrome Universal
Headlight Ears
- Replace stock headlight ears on most bikes with these universal ears.
- Fits forks from 32mm to 40mm.
- Chrome plated steel or Black painted steel.
14.95 A Pair
Chrome
14.95 A Pair
Black
Chrome
Horn
- Chrome 12V horn works with most bikes.
- Two spade connector hook-up.
- Nice and LOUD!!!
14.95
Heavy Duty
3-Piece Clamp
Chrome
Three-piece clamps work great for mounting footpegs, driving lights or other custom applications. They hold a lot of weight without slipping and do not damage mounting surface. With 1/2 inch mount hole. Order in 5 different clamping diameters below. SOLD EACH.
7/8 Inch Clamp
1 Inch Clamp
1-1/8 Inch Clamp
1-1/4 Inch Clamp
1-1/2 Inch Clamp
Gold Insert
Universal
Pegs
Sold in pairs, universal chrome clamp-on pegs with your choice of gold or rubber inserts. Can be used on one inch-1 1/4 inch applications. You can also remove the clamp to bolt directly to any mount with at least a 10mm hole
Honda Gold Insert
Kawasaki Gold Insert
Suzuki Gold Insert
Yamaha Gold Insert
Goldwing Gold Insert
V-Twin Gold Insert
Rubber Insert
Chrome
Universal
Pegs
Sold in pairs, universal chrome clamp-on pegs with your choice of 3-hole or dimpled. Can be used on one inch-1 1/4 inch applications. You can also remove the clamp to bolt directly to any mount with at least a 10mm hole
Chrome 3-Hole
Or
Chrome Dimpled
Sold In Pairs
Chrome O-Ring
Pegs
Sold in pairs, universal chrome clamp-on pegs with rubber o-rings. Can be used on one inch-1 1/4 inch applications. You can also remove the clamp to bolt directly to any mount with at least a 10mm hole
Chrome O-Ring Pegs
Universal
Rear
Brake Switch
Choppers and
early vintage
- Lucas replica found on some early British bikes
- Great for chopper applications
- comes as shown in picture
#BS425
Hydraulic
Brake Light Switch
- Feature a chrome finish with wires and terminals
- Course Thread for Kaw-Hon-Yam applications
- Fine Thread for Suzuki Ducati
- Works with any hydraulic brake to add brake switch in place of the brake line bolt
Great for custom bikes!!
Chrome & Colored
Cable Cover
Chrome plastic cable cover appr 60 inches long and available 3/16 and 5/16 inch diameter
3/16 Chrome
5/16 Chrome
Standard Cable
Adjusters
Standard cable adjusters for brake or clutch applications for most bikes, not for late model sport bikes. Available in all brass or annodized silver aluminum. No RUST! cool look.
Solid Brass
Aluminum
- All aluminum lever assemblies
- assemblies complete with perch, 10mm mirror mount and cable adjuster.
- Based on a OE Honda design
Brake Right Side
Clutch Left Side
Mini Sculpted Lights
Bullet Style
-Sold In Pairs-
- Awesome looking chrome bullet light.
- Can be mounted to a part 1/4 inch thick or less.
- Approximately 3 inches long. Additional bulbs can be ordered separately.
- Comes with red and amber lens.
- Dual element so they can be used for signals, brake lights, and running lights.
- You will get two lights with amber lens and included will be 2 additional red lens.
- Sold as a pair
Bullet
Signals
Bulb Only
Sold Each
Mini Sculpted Lights
Bullet Style
- Feature precision die-cast, one-piece chrome housings with bottom mount
- Dual-filament bulb
- Can be used as a tail light, marker light, or a turn signal/running light.
- Measure 2 1/8" H x 2 3/8" W x 2 1/2" D; come with amber lens installed and an extra red lens in the package
- Sold each
Dual Element
Marker Light
Bulb Only
Sold Each